| Quantity: | |
|---|---|
VMC1580
ALLES CNC
vmc processing technology drilling
ALLES CNC vertical machining has been around in its most basic form for over 150 years. However, it is still one of the newest forms of machining technology (turning/lathe being the oldest). The "milling" process requires a rotating tool or drill, and a movable table that holds the work piece. The tool is attached to and rotates in a housing called the "spindle". Through the sharpness of the tool and the force of the table pushing the material into the knife, the material yields and is cut or scraped as desired. The force axis can be up/down (called the Z-axis), left/right (called the X-axis), or front-to-back (called the Y-axis).
Technical Parameters
| Item | Unit | ALVMC1580 | |
| Worktable | Worktable size | mm | 1600*800 |
| Load capacity | kg | 1000 | |
| T-slot (width x number x pitch) | mm | 18x7x110 | |
| Travel | X-axis travel | mm | 1500 |
| Y-axis travel | mm | 800 | |
| Z axis travel | mm | 700 | |
| Spindle | Distance from spindle nose to work surface | mm | 185-885 |
| Distance from spindle center to column | mm | 855 | |
| Spindle speed | rpm | 6000 | |
| Spindle taper | Type | BT-50 | |
| Spindle head casing bore | mm | φ190mm | |
| Automatic tool change | Tool diameter (no adjacent tool) | mm | Φ115（Φ228） |
| Maximum tool length | mm | 350 | |
| Maximum tool weight | kg | 15 | |
| Knife handle | Type | BT-50 | |
| Tool magazine capacity | Pieces | 24 | |
| Spindle motor (continuous / 15 minutes) | kW | 15/18.5 | |
| Servo motor (X / Y / Z) | kW | 3.0/3.0/3.0 | |
| Automatic lubrication device | w | 35 | |
| Cutting fluid pump | w | 840 | |
| battery capacity | kVA | 35 | |
| other | Air source pressure requirements | kg/cm | 6 |
| Cutting water tank capacity | L | 400 | |
| positioning accuracy | mm | 0.02 | |
| Repeated positioning accuracy | mm | 0.01 | |
| Floor area and height | mm | 3550*3100*2850 | |
| Machine weight | kg | 12000 | |
CNC Vertical Machine Center Factory Show
1. Environmental protection and no pollution. Because there will be no oil pollution and mist spray, the surrounding environment will not be polluted'
2. The oil supply is accurate. The oil can be delivered to the lubrication points such as the spindle and the lead screw according to different needs by adding a regulating valve;
3. There is no problem of difficult atomization of high-viscosity lubricating oil; it is suitable for any oil;
The CNC vertical machining center is mainly used for the processing of various complex planes, curved surfaces and shell parts, such as the milling of various cams, molds, connecting rods, blades, propellers and boxes, and can also be used for drilling, , etc. For the processing of parts such as boxes, cavities, and molds, CNC milling machines and machining centers with specifications can meet the basic processing requirements.
vmc processing technology drilling
ALLES CNC vertical machining has been around in its most basic form for over 150 years. However, it is still one of the newest forms of machining technology (turning/lathe being the oldest). The "milling" process requires a rotating tool or drill, and a movable table that holds the work piece. The tool is attached to and rotates in a housing called the "spindle". Through the sharpness of the tool and the force of the table pushing the material into the knife, the material yields and is cut or scraped as desired. The force axis can be up/down (called the Z-axis), left/right (called the X-axis), or front-to-back (called the Y-axis).
Technical Parameters
| Item | Unit | ALVMC1580 | |
| Worktable | Worktable size | mm | 1600*800 |
| Load capacity | kg | 1000 | |
| T-slot (width x number x pitch) | mm | 18x7x110 | |
| Travel | X-axis travel | mm | 1500 |
| Y-axis travel | mm | 800 | |
| Z axis travel | mm | 700 | |
| Spindle | Distance from spindle nose to work surface | mm | 185-885 |
| Distance from spindle center to column | mm | 855 | |
| Spindle speed | rpm | 6000 | |
| Spindle taper | Type | BT-50 | |
| Spindle head casing bore | mm | φ190mm | |
| Automatic tool change | Tool diameter (no adjacent tool) | mm | Φ115（Φ228） |
| Maximum tool length | mm | 350 | |
| Maximum tool weight | kg | 15 | |
| Knife handle | Type | BT-50 | |
| Tool magazine capacity | Pieces | 24 | |
| Spindle motor (continuous / 15 minutes) | kW | 15/18.5 | |
| Servo motor (X / Y / Z) | kW | 3.0/3.0/3.0 | |
| Automatic lubrication device | w | 35 | |
| Cutting fluid pump | w | 840 | |
| battery capacity | kVA | 35 | |
| other | Air source pressure requirements | kg/cm | 6 |
| Cutting water tank capacity | L | 400 | |
| positioning accuracy | mm | 0.02 | |
| Repeated positioning accuracy | mm | 0.01 | |
| Floor area and height | mm | 3550*3100*2850 | |
| Machine weight | kg | 12000 | |
CNC Vertical Machine Center Factory Show
1. Environmental protection and no pollution. Because there will be no oil pollution and mist spray, the surrounding environment will not be polluted'
2. The oil supply is accurate. The oil can be delivered to the lubrication points such as the spindle and the lead screw according to different needs by adding a regulating valve;
3. There is no problem of difficult atomization of high-viscosity lubricating oil; it is suitable for any oil;
The CNC vertical machining center is mainly used for the processing of various complex planes, curved surfaces and shell parts, such as the milling of various cams, molds, connecting rods, blades, propellers and boxes, and can also be used for drilling, , etc. For the processing of parts such as boxes, cavities, and molds, CNC milling machines and machining centers with specifications can meet the basic processing requirements.
